Product Introduction
TV Mount Full Motion 65 Inch is a multi-jointed wall mount that supports flat-panel TVs up to 65 inches in size. It has rotation, tilt and telescopic functions, allowing for multi-angle adjustment and flexible positioning of the TV on the wall.
Applications
Smart conference and multi-angle presentation
Suitable for corporate conference rooms and collaborative spaces, it supports multi-angle rotation and tilt adjustment of 65-inch TVs, which is convenient for optimizing viewing angles according to the positions of participants.
Commercial and retail display space
In retail stores, showrooms, reception areas and other places, the TV direction can be flexibly adjusted to adapt to different traffic directions and display content.
Educational interactive teaching
Suitable for classrooms and training rooms, the TV angle can be adjusted according to teaching needs, meet different viewing positions, enhance interactive experience, and adapt to diversified teaching forms.
Medical and diagnostic space
In hospitals or imaging centers, install 65-inch TVs for auxiliary diagnosis, remote consultation or patient information display, and flexibly adjust the screen angle for medical staff and patients to view together.
Product Parameters
| Model: | WGTM101-010M |
| VESA: | 100x100mm,200x200mm,300x300mm,400x400mm |
| Fit Screen Size: | 23"-70" |
| Swivel: | ±90° |
| Tilt: | -11°～+6° |
| Weight Capacity: | 35kgs(77lbs) |
| Thickness: | 1.5mm |
| Distance to the wall: | 62-428mm |
| Material: | Solid Steel |
| Color: | Black |
Installation tools and process
1. Preparation stage (tools and measurements)
The tools required include: electric drill (and corresponding drill bit), screwdriver, tape measure, level, pencil, nail finder (if it is a gypsum board wall), hammer, socket wrench or adjustable wrench, and necessary safety protection equipment.
Step 1: Confirm the wall type. Determine whether the wall is a solid wall (such as a brick wall or concrete wall) or a lightweight wall (such as a gypsum board wall). Solid walls can be fixed with expansion screws, while lightweight walls must be installed at the wooden keel position.
Step 2: Determine the installation height and position of the bracket. Use a tape measure to measure the appropriate installation height. It is usually recommended that the bottom edge of the TV be between 90 and 110 cm from the ground. Then mark the installation hole position on the wall according to the size of the bracket and calibrate it with a level.
Step 3: Use an electric drill to drill holes at the marked positions. If it is a concrete wall, use an impact drill and an 8 to 10 mm drill bit. After drilling, insert the expansion tube to fix the bracket later.
2. Mounting the bracket and mounting the TV on the wall
Step 4: Install the bracket base. Align the bracket base with the pre-punched holes and use heavy-duty screws to firmly fix it on the wall. Be sure to use a level meter again to confirm whether the bracket is installed horizontally.
Step 5: Install the arm on the back of the TV. According to the VESA hole spacing on the back of the TV, select screws of appropriate length to install the arm. Do not use screws that are too short or too long to avoid damaging the internal structure of the TV.
Step 6: Hang the TV on the wall bracket. It is recommended that two people work together to slowly lift the TV and align it with the bracket, and hang the arm into the fixing slot of the wall bracket. Some brackets are designed with buckles or safety screws, which need to be locked after hanging the TV.
Step 7: Confirm that the installation is stable and organize the cables. Check whether the TV is firmly fixed. You can gently push it back and forth to confirm that there is no looseness. Finally, organize the power cord and signal cable to prevent the cables from hanging or pulling.
The Benefits of Choosing Us
Independent laser cutting and CNC bending process
The company is equipped with laser cutting machines and CNC bending machines to accurately control the processing dimensions of the TV Mount Full Motion 65 Inch bracket arm and connecting plate. The hole position tolerance is stable within ±0.15mm, achieving structural consistency in mass production.
Robot welding system
The core bearing arm and the movable hinge are automatically welded by robots. The heat affected zone of the weld is strictly controlled. The strength of the weld point is uniform and there are no man-made defects, ensuring that the TV Mount Full Motion 65 Inch has stable performance under frequent adjustments and long-term use.
International certification standards
The company has passed ISO9001 and CE certification. The surface of the TV Mount Full Motion 65 Inch adopts an automated powder spraying line, and the corrosion resistance reaches more than 96 hours of salt spray test. After spraying, it directly enters the assembly and packaging process to avoid bumps caused by manual handling, and ensure the consistency of the surface of the delivered products and the integrity of the packaging.
FAQ
Q: What are the supported TV sizes and maximum loads?
A: Suitable for 32 to 65-inch TVs, with a maximum load of about 45 kg. Please confirm the TV size and weight when purchasing.
Q: What VESA hole spacing specifications are supported?
A: Compatible with a variety of hole spacings from 75×75mm to 400×400mm, suitable for most 65-inch TVs.
Q: What are the adjustment functions?
A: Supports up and down tilt (generally ±15°), left and right rotation (±45° and above), and telescopic (about 8cm to 43cm), which is convenient for adjusting the viewing angle.
Q: Which wall is suitable for installation?
A: Must be installed on solid wood studs, concrete or brick walls, avoiding hollow walls or gypsum boards to ensure safety and stability.
Q: What are the safety protection measures?
A: Equipped with locking screws or safety buckles to prevent the TV from slipping. It is recommended to manually confirm the stability after installation.
Q: Is cable management convenient?
A: The bracket has sufficient space to extend, which is convenient for wiring and using cable troughs to keep the wiring neat.
Hot Tags: TV mount full motion 65 inch TV, China TV mount full motion 65 inch TV manufacturers, suppliers, factory, 75 Inch TV Full Motion Wall Mount, TV Mount with Flexible Arm
