Full Swivel TV Mount 65 Inch TV

Full Swivel TV Mount 65 Inch is a bracket used to mount a maximum 65-inch flat-panel TV on the wall. It has a horizontal rotation function to adjust the left and right angles of the TV.

Multi-angle presentation and collaboration space

Suitable for corporate collaboration areas, small meeting rooms and other places, supports 65-inch TV horizontal large-angle rotation, so that multiple people can clearly watch the presentation content from different angles.

Retail and display environment

In commercial spaces such as specialty stores, exhibition halls, reception areas, etc., the TV direction can be adjusted by rotation to meet the visual needs of customers in different positions, enhance the product display effect and information coverage.

Medical consultation and multi-party reading

Suitable for consulting rooms, waiting areas and consultation rooms, convenient for doctors, patients and multiple parties to view screen information from their respective positions, improve communication efficiency and visual comfort.

Multi-functional home use scenarios

Suitable for home spaces such as living rooms and open kitchens, users can flexibly adjust the TV angle according to the viewing, cooking or leisure positions.

1. Preparation stage (tools and measurements)

The tools required include: electric drill (and corresponding drill bit), screwdriver, tape measure, level, pencil, nail finder (if it is a gypsum board wall), hammer, socket wrench or adjustable wrench, and necessary safety protection equipment.

Step 1: Confirm the wall type. Determine whether the wall is a solid wall (such as a brick wall or concrete wall) or a lightweight wall (such as a gypsum board wall). Solid walls can be fixed with expansion screws, while lightweight walls must be installed at the wooden keel position.

Step 2: Determine the installation height and position of the bracket. Use a tape measure to measure the appropriate installation height. It is usually recommended that the bottom edge of the TV be between 90 and 110 cm from the ground. Then mark the installation hole position on the wall according to the size of the bracket and calibrate it with a level.

Step 3: Use an electric drill to drill holes at the marked positions. If it is a concrete wall, use an impact drill and an 8 to 10 mm drill bit. After drilling, insert the expansion tube to fix the bracket later.

2. Mounting the bracket and mounting the TV on the wall

Step 4: Install the bracket base. Align the bracket base with the pre-punched holes and use heavy-duty screws to firmly fix it on the wall. Be sure to use a level meter again to confirm whether the bracket is installed horizontally.

Step 5: Install the arm on the back of the TV. According to the VESA hole spacing on the back of the TV, select screws of appropriate length to install the arm. Do not use screws that are too short or too long to avoid damaging the internal structure of the TV.

Step 6: Hang the TV on the wall bracket. It is recommended that two people work together to slowly lift the TV and align it with the bracket, and hang the arm into the fixing slot of the wall bracket. Some brackets are designed with buckles or safety screws, which need to be locked after hanging the TV.

Step 7: Confirm that the installation is stable and organize the cables. Check whether the TV is firmly fixed. You can gently push it back and forth to confirm that there is no looseness. Finally, organize the power cord and signal cable to prevent the cables from hanging or pulling.

Automatic welding process

The company uses a robot welding system in the connection area between the load-bearing arm and the wall panel of the Full Swivel TV Mount 65 Inch TV product to ensure that each weld is uniform and full and meets the requirements of mechanical distribution, with stronger consistency.

Internal precision machining system

The company is equipped with laser cutting machines, CNC stamping and automatic bending equipment, and has precision machining capabilities. It can manufacture the rotating arm, joint connection plate and bracket components of the Full Swivel TV Mount 65 Inch TV product with high matching degree, and the dimensional error of key moving parts is controlled within ±0.15mm.

Export standard quality control system

The company has established a production and quality control system that meets ISO9001 standards. The Full Swivel TV Mount 65 Inch TV product strictly implements the EU CE and North American market requirements during the entire process of spraying, assembly and packaging. The automatic spraying line ensures uniform adhesion of the anti-corrosion layer, and the salt spray resistance is higher than 96 hours. The finished product uses a special cushioning packaging and passes the transportation drop test.

Hot Tags: full swivel TV mount 65 inch TV, China full swivel TV mount 65 inch TV manufacturers, suppliers, factory, 75 Inch TV Full Motion Wall Mount, TV Mount with Flexible Arm, TV Mount Full Motion 65 Inch TV